Aluminum alloy strip manufacturing process for the manufacture of brazed heat exchangers

   
   

The invention relates to a process to manufacture a clad strip, <1.5 mm thick, intended for the manufacture of brazed heat exchangers, comprising: casting of a plate made of core alloy composed as follows (o by weight): Si<0.8 Fe<0.8 Cu: 0.2-0.9 Mn: 0.7-1.5 Mg<0.4 Zn<0.2 Ti<0.1 other elements <0.05 each and <0.15 in total, the remainder aluminum, homogenization of said plate between 550 and 630.degree. C. for at least one hour, cladding on one or two sides of said blank of a brazing aluminum alloy, preferentially containing 5 to 13% silicon, hot rolling followed by cold rolling of the plated blank to a thickness close to the final thickness, recrystallization annealing of the strip between 300 and 4000C., strain hardening of the annealed strip to obtain a permanent deformation between 2 and 10% and the final thickness.

Η εφεύρεση αφορά μια διαδικασία για να κατασκευάσει μια ντυμένη λουρίδα,

 
Web www.patentalert.com

< Reservoir management system

< Large water reservoir management system

> Process for applying a softening or emollient lotion to a paper product and paper product obtained according to this process

> Bundle of products consisting of absorbent paper

~ 00120