Multi-station machining center

   
   

A machining center comprising at least two workstations. A first workstation is adapted to receive a first workpiece, and a second workstation is adapted to receive a second workpiece. The first workstation may be a vacuum table, and the second workstation may be comprised of a plurality of hold-down bars. A carriage is adapted to travel between the two workstations in one machine cycle. The carriage may have a single tool or a plurality of tools. During the machine cycle, the carriage is adapted to perform a machining operation (e.g., routing, drilling, sawing, and/or sanding) on the workpiece at each workstation.

Подвергая механической обработке центр состоя из по крайней мере 2 workstations. Первый workstation приспособлен для того чтобы получить первый workpiece, и второй workstation приспособлен для того чтобы получить второй workpiece. Первый workstation может быть таблицей вакуума, и второй workstation может состояться из множественности штанг hold-down. Экипаж приспособлен к перемещению между 2 workstations в один машинныйа цикл. Экипаж может иметь одиночный инструмент или множественность инструментов. Во время машинныйа цикл, экипаж приспособлен для того чтобы выполнить подвергая механической обработке деятельность (например, направлять, сверлить, пилить, and/or зашкурить) на workpiece на каждом workstation.

 
Web www.patentalert.com

< Supplemental handle

< Detecting tool orientation, alignment, depth, and leveling

> Hardware for cutting bone cores

> Metal plate coated with lubricating resin and drilling processing method of printed wiring board use thereof

~ 00120