Hub-protecting cap for a helicopter tail rotor

   
   

A hub-protecting cap for use with a helicopter. The helicopter has a fuselage, a tail rotor assembly operatively coupled to the fuselage for rotation relative to the fuselage about a tail rotor axis, at least one tail rotor blade detachably connected to the tail rotor assembly, a retention pin, and a pitch control link mechanism. The hub-protecting cap comprises a cap body portion, a pin-receiving aperture, and a link-attaching portion. The cap body portion is adapted to be attached to a hub portion of the tail rotor assembly in a manner to cover the hub portion when the tail rotor blade is detached from the tail rotor assembly. The cap body portion has a hub socket adapted such that pitch change bearing surfaces of the hub portion are within the hub socket of the cap body portion when the cap body portion is attached to the hub portion. The pin-receiving aperture is through the cap body portion. The pin-receiving aperture is sized and located to align with a portion of a retention strap of the tail rotor assembly and to receive a retention pin when the cap body portion is attached to the hub portion. The link-attaching portion extends from the cap body portion. The link-attaching portion is sized and adapted for attachment to a pitch control link mechanism of the tail rotor assembly when the cap body portion is attached to the hub portion.

Юуб-za5i5a4 крышка для пользы с вертолетом. Вертолет имеет фюзеляж, агрегат ротора кабеля оперативно соединенный к фюзеляжу для вращения по отношению к фюзеляжу о оси ротора кабеля, по крайней мере одно лезвие ротора кабеля detachably соединенное к агрегату ротора кабеля, штырь удерживания, и механизм соединения управления по тангажу. Юуб-za5i5a4 крышка состоит из части тела крышки, штыр-poluca4 апертуры, и соединени-prikrepl44s6 части. Часть тела крышки приспособлена быть прикрепленным к части hub агрегата ротора кабеля in a manner для того чтобы покрыть часть hub когда лезвие ротора кабеля разделено от агрегата ротора кабеля. Тело крышки, котор часть имеет гнездо hub приспособило такие что поверхности подшипника изменения тангажа части hub находятся внутри гнездо hub части тела крышки когда часть тела крышки прикреплена к части hub. Штыр-poluca4 апертура через часть тела крышки. Штыр-poluca4 апертура определена размер и обнаружена местонахождение для того чтобы выровнять с частью планки удерживания агрегата ротора кабеля и получить штырь удерживания когда часть тела крышки прикреплена к части hub. Соединени-prikrepl44s6 часть удлиняет от части тела крышки. Соединени-prikrepl44s6 часть определена размер и приспособлена для приложения к механизму соединения управления по тангажу агрегата ротора кабеля когда часть тела крышки прикреплена к части hub.

 
Web www.patentalert.com

< Ram air parachute canopy with improved nose structure

< Sea-land-sky craft

> Axi-symmetric mixed compression inlet with variable geometry centerbody

> Economy aircraft sleeper seat

~ 00107