Ferritic heat-resisting steel

   
   

A ferritic heat-resisting steel that shows a slight decrease in creep strength at the heat affected zone of the welded joint. The steel is characterized by consisting of, by mass %, C: less than 0.05%, Si: not more than 1.0%, Mn: not more than 2.0%, P: not more than 0.030%, S: not more than 0.015%, Cr: 7-14%, V: 0.05-0.40%, Nb: 0.01-0.10%, N: not less than 0.001% but less than 0.050%, sol. Al: not more than 0.010%, and O (oxygen): not more than 0.010%, with the balance being Fe and impurities, and further characterized in that the density of carbide and carbonitride precipitates contained with a grain diameter of not less than 0.3 .mu.m is not more than 1.times.10.sup.6 /mm.sup.2. This steel may further contain one or more of the following elements: a total of 0.1-5.0% of Mo and W; a total of 0.02-5.00% of Cu, Ni and Co; a total of 0.01-0.20 of Ta, Hf, Nd and Ti; a total of 0.0005-0.0100% of Ca and Mg; and 0.0005-0.0100% of B.

Ένας φερριτικός πυρίμαχος χάλυβας που παρουσιάζει μικρή μείωση στη δύναμη ερπυσμού στη θερμότητα είχε επιπτώσεις στη ζώνη της ενωμένης στενά ένωσης. Ο χάλυβας χαρακτηρίζεται από τη σύσταση από, από τη μάζα %, γ: λιγότερο από 0,05%, Si: όχι περισσότερο από 1,0%, ΜΝ: όχι περισσότερο από 2,0%, π: όχι περισσότερο από 0,030%, s: όχι περισσότερο από 0,015%, χρώμιο: 7-14%, Β: 0.05-0.40%, NB: 0.01-0.10%, Ν: περισσότερο από 0,001% αλλά λιγότερο από 0,050%, κολλοειδές διάλυμα. Θ*Αλ: όχι περισσότερο από 0,010%, και ο (οξυγόνο): όχι περισσότερο από 0,010%, με την ισορροπία που είναι Φε και ακαθαρσίες, και περαιτέρω χαρακτηρισμένος στα οποία η πυκνότητα των ιζημάτων καρβιδίου και carbonitride περιείχε με μια διάμετρο σιταριού περισσότερο από 0,3 μu.μ είναι όχι περισσότερο από 1.times.10.sup.6/$l*mm.sup.2. Αυτός ο χάλυβας μπορεί περαιτέρω να περιλάβει ενός ή περισσότερων από τα ακόλουθα στοιχεία: συνολικά 0.1-5.0% του MO και του W συνολικά 0.02-5.00% του cu, του Νι και του κοβαλτίου συνολικά 0.01-0.20 του TA, του HF, του ND και του Tj συνολικά 0.0005-0.0100% του ασβεστίου και του MG και 0.0005-0.0100% του β.

 
Web www.patentalert.com

< Method for estimating and controlling flow pattern of molten steel in continuous casting and apparatus therefor

< Warm compaction of steel powders

> Method for rehabilitative and/or protective corrosion-inhibition of reinforcing steel embedded in a hardened concrete structure by means of surface-applied corrosion-inhibiting compositions

> Steel for machine structural use

~ 00107