Method of varying the ink density of the full tone in offset printing within a rotary printing machine

   
   

A method of varying the ink density of the full tone in printing within a rotary printing machine with an ink application system which can provide a constant quantity of ink which, in spite of constant ink supply from the inking unit, permits control of the full-tone density or adaptation of the raster tonal values in the print. The method includes setting the binary image on a printing plate. A basic raster of raster points, which determines the area coverage of the binary image, is produced on the printing plate for the variable-area image information. The basic raster is then superimposed on a fine microraster in such way that the area coverage of the basic raster is reduced by a percentage which can be set between 0% and 100%.

Метод менять плотность чернил полного тона в печатать внутри роторная печатая машина с системой применения чернил может обеспечить постоянн количество чернил, in spite of постоянн поставка чернил от покрывая краской блока, позволяют управление плотности полн-tona или приспособление значений tonal растра в печати. Метод вклюает устанавливать бинарное изображение на печатая плите. Основной растр пунктов растра, который обусловливает охват зоны бинарного изображения, произведен на печатая плите для данных по изображения переменн-zony. Основной растр после этого перекрын на точном microraster в такой дороге что охват зоны основного растра уменьшен процентом можно установить между 0% и 100%.

 
Web www.patentalert.com

< Device for the temperature equalisation of coating media

< Process for the treatment of an erasable lithographic printing plate

> Printing unit of a web-fed printing press with driven cylinder pairs

> Cylinder for a folder unit

~ 00103