Process for the production of a deodorant or antiperspirant product

   
   

A deodorant or antiperspirant soft solid composition is filled into dispensing containers by injection moulding, i.e. under pressure, preferably in the vicinity of its normal setting temperature. The deodorant or antiperspirant composition is preferably continuously produced in a screw extruder, especially a twin screw extruder, controlled to deliver the composition in a suitably viscous state under low shear and particularly for formulations in which a particulate antiperspirant is suspended in a fluid carrier. The pressure in the injection head at the point of injection is greater than 120 kPa and in many instances from 800 to 2000 kPa. The combined process offers benefits for controlled fill of dispensing containers, particularly for formulations incorporating sensitive ingredients and offers tolerance in composition temperature at the time of fill.

 
Web www.patentalert.com

< Remanufacturing method for process cartridge

< Polarizer constructions and display devices exhibiting unique color effects

> Packaging a strip of material in side by side stacks spliced end to end

> Automated tinting film remover for vehicle window glass

~ 00103