Automated, custom mold manufacture for a part begins by creating and
storing a collection of information of standard tool geometries and
surface profiles machinable by each of the standard tool geometries. A
customer sends a CAD file for the part to be molded to the system. The
system assesses the CAD file to determine various pieces of mold
manufacturing information. One or more acceptability criteria are applied
to the part, such as whether the part can be manufactured in a two-piece,
straight-pull mold, and whether the mold can by CNC machined out of
aluminum. If not, the system sends a file to the customer graphically
indicating which portions of the part need modification to be
manufacturable. With any such modifications, the system provides the
customer with a quotation of the cost to manufacture the mold or a number
of parts. The quotation is based upon mold manufacturing time as
automatically assessed from the part drawings. The customer's part is
geometrically assessed so the system automatically selects appropriate
tools and computes tool paths for mold manufacture. In addition to the
part cavity, the system preferably assesses the parting line, the shutoff
surfaces, the ejection pins and the runners and gates for the mold. The
preferred system then generates CNC machining instructions to manufacture
the mold, and the mold is manufactured in accordance with these
instructions.
Geautomatiseerd, begint de vervaardiging van de douanevorm voor een deel door een inzameling van informatie van standaardhulpmiddelmeetkunde en oppervlakteprofielen te creëren en op te slaan machinebewerkbaar door elk van de standaardhulpmiddelmeetkunde. Een klant verzendt een CAD dossier voor het deel dat aan het systeem moet worden gevormd. Het systeem beoordeelt het CAD dossier om diverse stukken van vorm productieinformatie te bepalen. Één of meerdere aanvaardbaarheidscriteria worden toegepast op het deel, zoals of het deel kan worden vervaardigd in een tweedelige, recht-trekkrachtvorm, en of de vorm door CNC kan die uit aluminium machinaal wordt bewerkt. Als niet, verzendt het systeem een dossier naar de klant die grafisch op welke gedeelten wijst van het deel wijziging om manufacturable vergen te zijn. Met zulk wijzigingen, voorziet het systeem de klant van een citaat van de kosten om de vorm of een aantal delen te vervaardigen. Het citaat is gebaseerd op vorm productietijd zoals die automatisch van de deeltekeningen wordt beoordeeld. Het deel van de klant wordt geometrisch beoordeeld zodat selecteert het systeem automatisch aangewezen hulpmiddelen en verwerkt hulpmiddelwegen voor vormvervaardiging gegevens. Naast de deelholte, beoordeelt het systeem de scheidingslijn, de afsluitingsoppervlakten, de uitwerpingsspelden en bij voorkeur de agenten en de poorten voor de vorm. Het aangewezen systeem produceert dan CNC machinaal bewerkend instructies om de vorm te vervaardigen, en de vorm wordt vervaardigd overeenkomstig deze instructies.