A non-aqueous electrolyte secondary cell containing a compound of an olivinic structure as a cathode active material is to be improved in load characteristics and cell capacity. To this end, there is provided a non-aqueous electrolyte secondary cell including a cathode having a layer of a cathode active material containing a compound represented by the general formula Li.sub.x Fe.sub.1-y M.sub.y PO.sub.4, where M is at least one selected from the group consisting of Mn, Cr, Co, Cu, Ni, V, Mo, Ti, Zn, Al, Ga, Mg, B and Nb, with 0.05.ltoreq.x.ltoreq.1.2 and 0.ltoreq.y.ltoreq.0.8, an anode having a layer of a cathode active material containing the anode active material and a non-aqueous electrolyte, wherein the layer of the cathode active material has a film thickness in a range from 25 to 110 .mu.m. If a layer of a cathode active material is provided on each surface of a cathode current collector, the sum of the film thicknesses of the layers of the cathode active material ranges between 50 and 220 .mu.m. The non-aqueous electrolyte may be a liquid-based electrolyte or a polymer electrolyte.

Eine Sekundärzelle des nichtwässerigen Elektrolyts, die ein Mittel einer olivinic Struktur als Kathode aktives Material enthält, soll in den Last Eigenschaften und in der Zelle Kapazität verbessert werden. Zu diesem Zweck wird einer Sekundärzelle des nichtwässerigen Elektrolyts einschließlich eine Kathode zur Verfügung gestellt, die eine Schicht eines Kathode aktiven Materials hat, das ein Mittel enthält, das durch die allgemeine Formel Li.sub.x Fe.sub.1-y M.sub.y PO.sub.4 dargestellt wird, wo M eins mindestens ist, das von der Gruppe vorgewählt wird, die aus Mangan, Cr, Co, Cu, Ni, V, MO, Ti, Zn, Al, Ga, Magnesium, B und Notiz:, mit 0.05.ltoreq.x.ltoreq.1.2 und 0.ltoreq.y.ltoreq.0.8, eine Anode hat eine Schicht eines Kathode aktiven Materials besteht, welches das Anode aktive Material und einen nichtwässerigen Elektrolyt enthält, worin die Schicht des Kathode aktiven Materials hat eine Schichtstärke in einer Strecke von 25 bis 110 mu.m. Wenn eine Schicht eines Kathode aktiven Materials auf jeder Oberfläche eines Kathode Stromabnehmers, die Summe der Schichtstärken der Schichten der Kathode aktiven materiellen Strecken zwischen mu.m 50 und 220 zur Verfügung gestellt wird. Der nichtwässerige Elektrolyt kann ein Flüssigkeit-gegründeter Elektrolyt oder ein Polymer-Plastik Elektrolyt sein.

 
Web www.patentalert.com

< Positive electrode for non-aqueous electrolyte cell and manufacturing method of the same

< Fuel cell apparatus

> Method of preparing polymer electrolyte composition and method of manufacturing lithium secondary battery using the same

> Nanoparticles having oligonucleotides attached thereto and uses therefor

~ 00093