After a wide-band DCF is wound around a bobbin to form an optical fiber coil 32, the latter is removed from the bobbin and placed into a bundle state (the state where the increase in transmission loss in the wavelength band of 1.55 .mu.m caused by distortions in winding is reduced by 0.1 dB/km or more) released from distortions in winding. A resin 42 is used as a coil-tidying member so as to secure the optical fiber coil 32 to a storage case 40 at four positions. Both ends of the optical fiber coil 32 are connected to pigtail fibers at fusion-splicing parts 44, respectively. Even when the storage case 40 is closed with a lid after the optical fiber coil 32 is secured to the storage case 40 with the resin 42, there remain interstices within the bundle of the optical fiber coil 32 and a space between the optical fiber coil 32 and the storage case 40. As a result, even when the optical fiber coil 32 in a bundle state is accommodated in the storage case 40, transmission loss and the like would not increase.

Dopo che un DCF a larga banda sia ferito intorno ad una bobina per formare una bobina 32 della fibra ottica, il posteriore è rimosso dalla bobina e disposto in un pacco dichiari (il dichiarare dove l'aumento nella perdita di trasmissione nella fascia di lunghezza d'onda di mu.m 1.55 causato dalle distorsioni nella bobina è ridotto da 0.1 dB/km o più) liberato dalle distorsioni nella bobina. Una resina 42 è usata come membro arrotol-riordinante in modo da fissare la bobina 32 della fibra ottica ad un caso 40 di immagazzinaggio a quattro posizioni. Entrambe le estremità della bobina 32 della fibra ottica sono collegate alle fibre della treccia alle parti d'impionbatura 44, rispettivamente. Anche quando il caso 40 di immagazzinaggio è chiuso con un coperchio dopo che la bobina 32 della fibra ottica sia fissata al caso 40 di immagazzinaggio con la resina 42, rimane interstizi all'interno del pacco della bobina 32 della fibra ottica e di uno spazio fra la bobina 32 della fibra ottica ed il caso 40 di immagazzinaggio. Di conseguenza, anche quando la bobina 32 della fibra ottica in un pacco dichiara è accomodato nel caso 40 di immagazzinaggio, nella perdita di trasmissione ed in simili non aumenterebbe.

 
Web www.patentalert.com

< Optical device utilizing optical waveguides and mechanical light-switches

< Method of creating a photonic via using fiber optic

> Optical fiber winding tool

> Interconnecting circuit boards using free space optics

~ 00091