A control circuit for a piezo transformer based power supply includes oscillator circuitry, drive circuitry, sense circuitry, and feedback circuitry collectively operating to regulate an operational parameter of the supply, such as the current supplied to a cold cathode fluorescent lamp (CCFL). The feedback circuitry includes initialization circuitry that establishes an initial value of an oscillator control signal corresponding to an initial operating frequency, and thereafter permits the feedback circuitry to gradually drive the oscillator control signal to a normal operating value such that the operating frequency is swept from the initial operating frequency to a normal operating frequency. When controlling the power supplied to a CCFL, the initial operating frequency is preferably a maximum frequency of the oscillator, and the operating frequency is swept downward so as to pass through the frequency at which the lamp "strikes", or begins conduction, and thereafter into regulation.

Ein Steuerstromkreis für ein piezo Transformator gegründetes Spg.Versorgungsteil schließt Oszillatorschaltkreis, Antrieb Schaltkreis, Richtung Schaltkreis und den Rückgesprächschaltkreis, der zusammen funktioniert, um einen funktionsfähigen Parameter des Versorgungsmaterials zu regulieren, wie Netzstrom an eine kalte Kathode Leuchtstofflampe mit ein (CCFL). Der Rückgesprächschaltkreis schließt Initialisierung Schaltkreis, der einen Ausgangswert eines Oszillatorsteuersignals herstellt, das einer Ausgangsarbeitsfrequenz entspricht, mit ein und ermöglicht danach den Rückgesprächschaltkreis, das Oszillatorsteuersignal zu einem normalen funktionierenden Wert stufenweise zu fahren so, daß die Arbeitsfrequenz von der Ausgangsarbeitsfrequenz zu einer normalen Arbeitsfrequenz gefegt wird. Wenn sie die Energie steuert, die an ein CCFL, die Ausgangsarbeitsfrequenz geliefert wird, ist vorzugsweise, wird eine maximale Frequenz des Oszillators und die Arbeitsfrequenz abwärts gefegt, um durch die Frequenz zu überschreiten, an der die Lampe "anschlägt", oder Übertragung und danach in Regelung anfängt.

 
Web www.patentalert.com

< Circuit arrangement for operating a fluorescent lamp

< Electronic ballast with lamp run-up current regulation

> Circuit for flashing fluorescent lamps

> Electronic starter for fluorescent lamps

~ 00088