Reinforced plastic pellets comprise thermoplastic material and reinforcement particles that are less than 15% of a total volume of the pellets, and at least 40% have a thickness of less than 50 nanometers. A manifold (56) has at least two spaced valve gates (64) that are independently opened and closed as directed by a controller (68) to selectively communicate the manifold to a cavity. A primary injection pressure is applied to the plasticized pellet material in the manifold (56) to fill the cavity through sequential opening and closing of the gates (64). A lower secondary injection pressure is applied to the material in the manifold to continue filling the cavity. The gates are closed to seal the manifold from the cavity when the cavity is filled. The material is held within the manifold in compression by the valves while the cavity is open to prevent expansion of the material.

Las pelotillas plásticas reforzadas abarcan las partículas del material termoplástico y del refuerzo que son menos de el 15% de un volumen total de las pelotillas, y por lo menos los 40% tienen un grueso de menos de 50 nanómetros. Un (56) mul'tiple tiene por lo menos dos puertas espaciadas de la válvula (64) que se abran y estén cerradas independientemente según lo ordenado por un regulador (68) para comunicar selectivamente el múltiple a una cavidad. Una presión primaria de la inyección se aplica al material plastificado de la pelotilla en el (56) mul'tiple de llenar la cavidad con la abertura y el cierre secuenciales de las puertas (64). Una presión secundaria más baja de la inyección se aplica al material en el múltiple de continuar llenando la cavidad. Las puertas están cerradas para sellar el múltiple de la cavidad cuando se llena la cavidad. El material es llevado a cabo dentro del múltiple en la compresión por las válvulas mientras que la cavidad está abierta prevenir la extensión del material.

 
Web www.patentalert.com

< Physical property determination using surface enhanced raman emissions

< Method and apparatus for solid state molecular analysis

> Optical sensors for the detection of nitric oxide

> Reactive nanoparticles as destructive adsorbents for biological and chemical contamination

~ 00069