A scroll type compressor has both a high pressure lubricant sump and a low pressure lubricant sump. Lubricant from the low pressure lubricant sump is supplied to the various bearings, thrust surfaces and other moving components of the compressor. It is then rested in such a way that it can absorb heat from the motor windings thus maintaining the operating temperature of the motor. Lubricant from the high pressure sump is supplied to the moving compression chambers defined by the scrolls at a point intermediate suction and discharge. The lubricant supplied from the high pressure sump is first cooled and then used to cool the low pressure sump prior to being supplied to the moving compression chambers. The compressed gas is routed through two lubricant separators and a gas cooler prior to being supplied for its intended use.

Een roltype compressor heeft zowel een hoge zinkput van het druksmeermiddel als een zinkput van het lage druksmeermiddel. Het smeermiddel van de zinkput van het lage druksmeermiddel wordt geleverd aan de diverse lagers, duwoppervlakten en andere bewegende componenten van de compressor. Het wordt dan gerust zodanig dat het kan hitte van de motorwinding absorberen die zo de werkende temperatuur van de motor handhaaft. Het smeermiddel van de hoge drukzinkput wordt geleverd aan de bewegende compressiekamers die door de rollen bij een punt middenzuiging en een lossing worden bepaald. Het smeermiddel dat uit de hoge drukzinkput wordt geleverd wordt eerst gekoeld en dan gebruikt om de lage drukzinkput voorafgaand aan wordt geleverd aan de bewegende compressiekamers te koelen. Het samengeperste gas wordt geleid via twee smeermiddelseparators en een gaskoeler voorafgaand aan wordt geleverd voor zijn voorgenomen gebruik.

 
Web www.patentalert.com

< (none)

< Scroll compressor drive having a brake

> Oldham coupling for scroll machine

> (none)

~ 00064