In a fabrication method of coated optical fiber 21, the coated optical fiber 21 is fabricated by heating to soften an end of an optical fiber preform 11 to draw a glass fiber 13 out therefrom, laying coatings 16, 19 on the glass fiber 13 to make the coated optical fiber 21, and guiding the coated optical fiber 21 via a swing guide roller 23 periodically swinging, to twist the coated optical fiber 21, thereby imparting twists about the axis to the glass fiber 13 inside the coated optical fiber 21. The fabrication method comprises a step of passing the coated optical fiber 21 having passed the swing guide roller 23, through a free zone (between 26 and 27) in which the coated optical fiber 21 is allowed to freely rotate about the axis, and thereby longitudinally canceling out elastic torsion stored in the coated optical fiber 21 because of longitudinally alternate inversion of twist directions thereof, wherein a zone length L (m) of the free zone is not less than Lo (m) defined as follows: Lo (m)=[a maximum drawing speed of the coated optical fiber (m/min)]/[the number of clockwise and counterclockwise swing motions per unit time of the swing guide roller (motions/min)].

Dans une méthode de fabrication de fibre optique enduite 21, la fibre optique enduite 21 est fabriquée par la chauffage pour ramollir une extrémité d'une préforme 11 de fibre optique pour dessiner des fibres de verre 13 dehors de là, étendant les enduits 16, 19 sur les fibres de verre 13 pour faire la fibre optique enduite 21, et le guidage de la fibre optique enduite 21 par l'intermédiaire d'un rouleau 23 de guide d'oscillation balançant périodiquement, pour tordre la fibre optique enduite 21, donnant de ce fait tord autour de l'axe à l'intérieur des fibres de verre 13 la fibre optique enduite 21. La méthode de fabrication comporte une étape de passer la fibre optique enduite 21 ayant passé le rouleau 23 de guide d'oscillation, une zone franche (entre 26 et 27) dans lequel la fibre optique enduite 21 est permise de tourner librement autour de l'axe, et en décommandant de ce fait longitudinalement hors de la torsion élastique stockée dans la fibre optique enduite 21 en raison de l'inversion longitudinalement alternative des directions de torsion en, où une longueur de zone L (m) de la zone franche moins que bas (m) n'est pas définie comme suit : Bas (vitesse de dessin de maximum de m)=[a de la fibre optique enduite (nombre de m/min)]/[the des mouvements dans le sens des aiguilles d'une montre et dans le sens contraire des aiguilles d'une montre d'oscillation par temps d'unité du rouleau de guide d'oscillation (motions/min) ].

 
Web www.patentalert.com

< Dispersion compensating optical fiber, and dispersion compensating optical fiber module

< Optical fiber and method of making the same

> Positioning substrate for an optical device and positioning method using the substrate

> Microstructured optical fibres

~ 00060