An ink jet nozzle is made from a microfabrication technique including either laser ablation or precision injection molding. The laser ablation method includes ablating an upper surface of a nozzle plate to create a bore, optionally placing a photomask adjacent to the lower surface and over the bore, and laser ablating the lower surface of the nozzle plate to create a lip which extends away from the lower surface of the nozzle plate. The lip can prevent unwanted and/or asymmetrical deflection of ink droplets. Also, the nozzle can be made from plastics, polymers or ceramics, which are resistant to acidic or basic inks, which may cause deterioration of single silicon wafers or semiconductor materials. The precision injection molding microfabrication process includes providing upper and lower molds with a space therebetween, injecting the space with the molding material, and removing the upper and lower molds to release the thus formed ink jet nozzle. Using either method, ink jet nozzles can be made using new materials beyond the silicon or semiconductor materials, and a broader range of inks may be used as well. The structure of the ink jet nozzle includes a nozzle plate having upper and lower surfaces, a lip formed in one piece with the nozzle plate and extending away from the lower surface thereof, and a bore extending from the upper surface to the lower surface of the nozzle plate and completely through the lip. The bore has an interior surface inclined at an angle respective to the upper and lower surfaces, the angle being substantially constant throughout a thickness of the nozzle plate and the lid. A lower surface of the lid forms an acute angle with the interior surface of the bore to thereby enhance the anti-wetting quality of the nozzle.

Une encre voyagent en jet le bec est faite à partir d'une technique de microfabrication comprenant l'ablation de laser ou le moulage par injection de précision. La méthode d'ablation de laser inclut enlever un extrados d'un plat de bec pour créer un alésage, plaçant sur option un photomask à côté de l'intrados et de l'excédent le fâcheux, et laser enlevant l'intrados du plat de bec pour créer une lèvre qui se prolonge loin de l'intrados du plat de bec. La lèvre peut empêcher le débattement non désiré et/ou asymétrique des gouttelettes d'encre. En outre, le bec peut être fait à partir des plastiques, des polymères ou de la céramique, qui sont résistants aux encres acides ou de base, qui peuvent causer la détérioration des gaufrettes de silicium ou des matériaux simples de semi-conducteur. Le processus de microfabrication de moulage par injection de précision inclut fournir supérieur et moule plus bas avec un espace therebetween, injectant l'espace avec le matériel de bâti, et enlevant le supérieur et plus bas les moules pour libérer l'encre formée ainsi voyagent en jet le bec. En utilisant la méthode, l'encre voyagent en jet des becs peut être faite en utilisant de nouveaux matériaux au delà des matériaux de silicium ou de semi-conducteur, et une plus large gamme des encres peut être aussi bien employée. La structure de l'encre voyagent en jet le bec inclut un plat de bec ayant des intrados supérieurs et, une lèvre formée dans l'une seule pièce avec le plat de bec et se prolongeant loin de l'intrados en, et un alésage s'étendant de l'extrados à l'intrados du plat de bec et complètement par la lèvre. L'alésage a sous un angle un respectif incliné extérieur intérieur sur les intrados supérieurs et, l'angle étant essentiellement constant dans toute une épaisseur du plat de bec et du couvercle. Un intrados du couvercle forme un angle aigu avec la surface intérieure de l'alésage pour augmenter de ce fait la qualité d'anti-mouillage du bec.

 
Web www.patentalert.com

< (none)

< Tribo-addressed and tribo-supperessed electric paper

> Inbred maize seed and plant RPK7250

> (none)

~ 00057