A monitoring and control system for use in curing composite materials includes a model for a workpiece being cured. The model calculates current internal states of the workpiece and predicts, based upon past and current states of the workpiece, future states of the cure process. These future states are represented as virtual inputs to the controller, which controls operation of the cure process based upon both real and virtual inputs. Cure rates are affected by both external temperatures and internal heat generated by the curing process itself. The internally generated heat is considered by the model when calculating current states and predicting future states. By projecting the cure state into the future, problems caused by high cure rates can be avoided. In addition, pressure can be optimally controlled in response to estimated internal material state.

Контролировать и системаа управления для пользы в лечить составные материалы вклюает модель для будучи вылеченным workpiece. Модель высчитывает в настоящее время внутренне положения workpiece и предсказывает, основанные на прошлые и настоящие положения дел workpiece, будущие положения процесса лечения. Эти будущие положения представлены как фактически входные сигналы к регулятору, который деятельность управления процесса лечения основала и на реальных и фактически входных сигналах. Тарифы лечения повлияны на как внешними температурами так и внутренне жарой произведенными леча процессом самим. Внутренне произведенная жара рассмотрена моделью высчитывая настоящие положения дел и предсказывающ будущие положения. Путем проектировать положение лечения в будущее, проблемы причиненные высокими тарифами лечения могут избежаться. In addition, давление может быть оптимально controlled in response to оцененное внутренне материальное положение.

 
Web www.patentalert.com

<

<

> Pathogen management system

> Insoluble protein particles

~ 00052