A method of crosslinking polystyrene polymers and co-polymers for the formation of macroreticular materials of an Mc 30,000 to 50,000 is described. The materials forming an insoluble gel which is shaped in an extruder to 3 to 5 cm pieces and is subject to sulphonation with dense sulphuric acid, with oleum sulphuric acid with sulphur trioxide and with chlorosulphonic acid, and the introduction of sulphonic groups to a high density and with the introduction of nitric group and with the introduction of carboxylic group with the copolymer styrene-acrylonitrile. The chlorosulfonic group promotes sulphonation and crosslinking with the formation of bridges with the sulfone group which is controlled with a 10-20% of acetic acid present as regulator and an insoluble volume of gel is formed which following drainage of the solvent and after remaining to ripen for 4-7 hours it is treated with ethanol or propanol to extract the unreacted chlorosulphonic acid then is neutralised with sodium or potassium hydroxide subjected to an extruder for the preparation of 3-5 cm products. Following neutralisation and shrinkage to a 10% water content and the products produced are deodorised at a temperature of 160.degree. C. under vacuum and are converted to materials which absorb water inside their molecules up to 300 times their weight; having an inorganic content of 72-75% they exhibit a high degree of stability in the ground, they do not degrade and can be used indefinitely for water absorption-release so that they operate as fertility promoters to any type of soil leading to an increase of green growth, and to the planting of trees and forests and to advance food production.

Eine Methode des Querverbindens der Polystyrenpolymer-Plastiken und -copolymere für die Anordnung der macroreticular Materialien von einem Mc 30.000 bis 50.000 wird beschrieben. Die Materialien, die ein unlösliches Gel bilden, das in einen Extruder zu den 3 bis 5 Zentimeter Stücken geformt wird und abhängig von Sulfonierung mit dichter Schwefelsäure, mit Schwefelsäure des Oleums mit Schwefeltrioxyd und mit chlorosulphonic Säure ist und die Einleitung der Sulfogruppen zu einer hohen Dichte und mit der Einleitung der Stickstoffgruppe und mit der Einleitung der karboxylhaltigen Gruppe mit dem Copolymer Styrol-Acrylonitril. Die chlorosulfonsauer Gruppe fördert Sulfonierung und das Querverbinden mit der Anordnung der Brücken mit der Sulfongruppe, die mit 10-20% des Essigsäuregeschenkes gesteuert wird, während Regler und ein unlösliches Volumen des Gels gebildet wird, das folgende Entwässerung des Lösungsmittels und nachdem restlich, 4-7 Stunden lang zu reifen es, wird behandelt mit Äthanol, oder das Propanol, zum der ohne Reaktion chlorosulphonic Säure zu extrahieren dann mit dem Natrium- oder Kaliumhydroxid neutralisiert wird, das einem Extruder für die Vorbereitung der 3-5 Zentimeter Produkte unterworfen wird. Folgende Neutralisation und Schrumpfung zu einem 10% Wassergehalt und die produzierten Produkte werden bei einer Temperatur von 160.degree desodoriert. C. unter Vakuum und werden in Materialien umgewandelt, die Wasser innerhalb ihrer Moleküle bis 300mal ihr Gewicht aufsaugen; einen anorganischen Inhalt von 72-75% habend, stellen sie einen hohen Grad Stabilität im Boden aus, vermindern sie nicht und können für Wasser unbestimmt verwendet werden Absorption-freigeben, damit sie als Ergiebigkeitförderer zu irgendeiner Art Boden führend zu eine Zunahme des grünen Wachstums funktionieren, und zum Errichten der Bäume und der Wälder und zur Vornahrungsmittelproduktion.

 
Web www.patentalert.com

< (none)

< Water soluble sachet with a dishwasher composition

> Oral and injectable nutritional composition

> (none)

~ 00049