A method increases the feed throughput for a process of dehydrogenating light hydrocarbons without loss of conversion or selectivity by increasing the catalyst volume in only the final reactor of at least three reaction zones. The catalyst volume of the final reactor may be increased relative to the other reactors by extending the inner and outer screens that define a radial flow bed therein. Maintaining a low LHSV by increasing the catalyst volume in only the final reactor greatly reduces the expense of improving the capacity and yield of such a process. This method provides the most benefit to moving bed reactor systems since modifications are limited to the last reactor. A further benefit is derived from the simplified method of raising only a section of the last reactor to increase the catalyst volume.

Метод увеличивает throughput питания для процесса dehydrogenating светлые углероды без потери преобразования или селективности путем увеличивать том катализатора в только окончательном реакторе по крайней мере 3 зон реакции. Том катализатора окончательного реактора может быть увеличен по отношению к другим реакторам путем расширять внутренние и наружные экраны определяют кровать радиальной подачи в этом. Поддержание низкого LHSV путем увеличивать том катализатора в только окончательном реакторе больш уменьшает расход улучшать емкость и выход такого процесса. Этот метод снабубежит большинств преимущество moving системы реактора кровати в виду того что ограничены изменения к последнему реактору. Более последующее преимущество выведено от упрощанного метода поднимать только раздел последнего реактора для того чтобы увеличить том катализатора.

 
Web www.patentalert.com

< (none)

< Silicoaluminophosphate material, a method of making such improved material and the use thereof in the conversion of oxygenated hydrocarbons to an olefin and/or an ether

> Methods for optimizing Fischer-Tropsch synthesis of hydrocarbons in the distillate fuel and/or lube base oil ranges

> (none)

~ 00049