Methods and systems for transmitting data over a printed circuit board such as a backplane for example, are provided. The printed circuit board has a number of primary tracks each connected to receive a data stream from a respective transmitter which may be located on a card connected to the printed circuit board for example. The data streams are offset in time with respect to one another such that rising edges and falling edges do not coincide with each other in time. The primary tracks are all coupled electromagnetically to a single coupling track at another location on the printed circuit board, and the coupling track is connected to a receiver which may be located on another card for example. The transmitted data streams are all coupled electromagnetically onto the coupling track with each rising edge of any of the data streams resulting in a positive pulse in a coupled signal, and each falling edge of any of the data streams resulting in a negative pulse in the coupled signal. The receiver is capable of detecting all of the pulses, and thus detecting the data received from all of the transmitters. The received data consists of interleaved bits from each of the data streams, due to the offset in the data streams.

I metodi ed i sistemi per l'eccedenza trasmettente di dati un bordo stampato del circuito quale un pannello posteriore per esempio, sono forniti. Il bordo stampato del circuito ha un certo numero di piste primarie ciascuno collegata per ricevere un flusso di dati da un trasmettitore rispettivo che può essere situato su una scheda collegata al bordo stampato del circuito per esempio. I flussi di dati sono sfalsati a tempo riguardo ad uno gli altri tali che i bordi aumentare ed i bordi cadenti non coincidono con a vicenda a tempo. Le piste primarie tutte sono accoppiate elettromagneticamente ad una singola pista dell'accoppiamento ad un'altra posizione sul bordo stampato del circuito e la pista dell'accoppiamento è collegata ad una ricevente che può essere situata su un'altra scheda per esempio. I flussi di dati trasmessi tutti sono accoppiati elettromagneticamente sulla pista dell'accoppiamento con ogni bordo aumentare di c'è ne dei flussi di dati con conseguente impulso positivo in un segnale coppia e su ogni bordo cadente di c'è ne dei flussi di dati con conseguente impulso negativo nel segnale coppia. La ricevente è capace di rilevazione de tutti gli impulsi e così di rilevazione dei dati ricevuti da tutti i trasmettitori. I dati ricevuti consistono delle punte interfogliate da ciascuno dei flussi di dati, dovuto l'immagine riportata nei flussi di dati.

 
Web www.patentalert.com

< (none)

< Isolated asgal lipopolysaccharides and use of same to inhibit innate immune response

> Multiple gradient echo type projection reconstruction sequence for MRI especially for diffusion weighted MRI

> (none)

~ 00043