A spool is moved by controlling the amount of electric current supplied to a linear solenoid of a changeover valve, and selects any one of valve sections. The state of communication between fluid passages connected to the changeover valve is determined by the valve section and selected. With the selection of the valve section, the hydraulic fluid is discharged from the advance oil pressure chamber while being supplied to the advance oil pressure chamber, and also is discharged from the retard oil pressure chamber. The oil pressure in the advance oil pressure chamber remains low even when the oil is filled in the advance oil pressure chamber.

Катышка двинута путем контролировать количество электрического течения поставленное к линейному соленоиду клапана changeover, и выбирает любое один из разделов клапана. Положение сообщения между жидкими проходами соединенными к клапану changeover обусловлено разделом клапана и выбрано. С выбором раздела клапана, жидкостное наполнение разряжено от предварительной камеры давления масла пока поставляемо к предварительной камере давления масла, и также разряжено от камеры давления масла retard. Давление масла в предварительной камере давления масла остает низким even when масло заполнено внутри предварительной камере давления масла.

 
Web www.patentalert.com

< (none)

< Valve timing adjusting device

> Variable value timing mechanism with crank drive

> (none)

~ 00034