A hot-dip Zn--Al--Mg plated steel sheet good in corrosion resistance and surface appearance that is a hot-dip Zn-base plated steel sheet obtained by forming on a surface of a steel sheet a hot-dip Zn--Al--Mg plating layer composed of Al: 4.0-10 wt. %, Mg: 1.0-4.0 wt. % and the balance of Zn and unavoidable impurities, the plating layer having a metallic structure including a primary crystal Al phase or a primary crystal Al phase and a Zn single phase in a matrix of Al/Zn/Zn.sub.2 Mg ternary eutectic structure. To obtain a plating layer possessing this metallic structure, the cooling rate of the plating layer adhering to a steel strip extracted from a plating bath and the plating bath temperature are appropriately controlled in a continuous hot-dip plating machine and/or appropriate amounts of Ti and B are added to the bath. Occurrence of a stripe pattern peculiar to this plated steel sheet is controlled by morphology control of a Mg-containing oxide film up to solidification of the plating layer or by adding an appropriate amount of Be to the plating bath.

Heiß-tauchen Sie Zn -- Al -- das Magnesium überzogene Stahlblech ein, das in der Korrosionsbeständigkeit gut ist und Oberfläche Aussehen, das ist, heiß-taucht Zn-Unterseite ein, überzogenes, das Stahlblech erreicht, indem es auf einer Oberfläche eines Stahlblechs sich bildet, Zn -- Al -- Magnesium Überzugschicht bestand aus Al heiß-eintauchen: 4.0-10 Gew. %, Magnesium: 1.0-4.0 Gew. % und die Balance von Zn und unvermeidbare Verunreinigungen, Überzugschicht, die eine metallische Struktur einschließlich eine Primärkristallalphase oder eine Primärkristallalphase und ein einphasiges des Zn in einer Matrix Magnesium Al/Zn/Zn.sub.2 der dreifachen eutektischen Struktur hat. Um eine Überzugschicht zu erreichen, die diese metallische Struktur besitzt, werden die abkühlende Rate der Überzugschicht, die einen Stahlstreifen extrahiert wird von einem Überzugbad befolgt und die Überzugbadtemperatur passend in einem ununterbrochenem heiß-eintauchen Überzugmaschine gesteuert und/oder werden passende Mengen Ti und B dem Bad hinzugefügt. Auftreten eines Streifenmusters, das diesem überzogenen Stahlblech eigenartig ist, wird durch Morphologiesteuerung eines Magnesium-enthaltenen Oxidfilmes bis zur Verfestigung der Überzugschicht gesteuert, oder, indem Sie eine passende Menge von hinzufügen, seien Sie zum Überzugbad.

 
Web www.patentalert.com

< (none)

< Martensitic stainless steel welded pipe

> High strength, low alloy, heat resistant steel

> (none)

~ 00034