In a mobile, wireless telecommunications network, communications relating to a mobile terminal can be protected during a handover of the mobile terminal from a first access point to a second access point. This may be accomplished by transmitting a security token from the first access point to the mobile terminal, and then from the mobile terminal to the second access point, over the radio interface. Thereafter, the security token is transmitted from the first access point to the second access point through the fixed network to which both the first and the second access points are connected. The communications link between the mobile terminal and the second access point needed to achieve secure handover is then established only if the second access point determines that the security token received from the mobile terminal matches the security token received from the first access point.

Dans un mobile, le réseau de télécommunications sans fil, communications concernant une borne mobile peut être protégé pendant une passation de la borne mobile contre un premier point d'accès à un deuxième point d'accès. Ceci peut être accompli en transmettant une marque de sécurité du premier point d'accès à la borne mobile, et puis de la borne mobile au deuxième point d'accès, au-dessus de l'interface par radio. Ensuite, la marque de sécurité est transmise du premier point d'accès au deuxième point d'accès par le réseau fixe auquel les premiers et deuxièmes points d'accès sont reliés. La liaison entre la borne mobile et le deuxième point d'accès requis pour réaliser la passation bloquée est alors établie seulement si le deuxième point d'accès détermine que la marque de sécurité reçue de la borne de mobile assortit la marque de sécurité reçue du premier point d'accès.

 
Web www.patentalert.com

< (none)

< Method for manufacturing a micromechanical device

> System and method for detecting cloning fraud in cellular/PCS communications

> (none)

~ 00032