The application describes a steel composition consisting essentially of Carbon 0.50-0.70 weight % Silicon up to 0.40 weight % Manganese 0.55-1.00 weight % Phosphorus 0.030-0.070 weight % Sulphur 0.055 to 0.110 weight % Chromium up to 0.50 weight % Molybdenum up to 0.10 weight % Nickel up to 0.5 weight % Copper up to 0.50 weight % Aluminium up to 0.050 weight % Optionally, Vanadium sufficient to maintain yield strength Nitrogen up to 0.030 weight %, together with, optionally, lead up to 0.4 weight %, and unavoidable impurities, the balance being iron. This steel composition exhibits mechanical properties which are suitable for use in connecting rods but which provide both good fracture splitting performance and good machinability when compared to C70S6 alloys. The application also refers to a fracture splittable steel including between 0.50 to 0.70 wt % C, 0.55 to 1.00 wt % Mn, 0.030 to 0.070 wt % P and 0.055 to 0.110 wt % S, and with an elongation of 25% or less, a reduction of area below 25%, and a V.sub.20 machinability (m/min) satisfying the equation: V.sub.20.gtoreq.80-0.2H where H is the HV30 hardness of the steel.

De toepassing beschrijft een staalsamenstelling die hoofdzakelijk uit Koolstof 0.50-0.70 naar keuze bestaan weight% Silicium tot 0,40 weight% Mangaan 0.55-1.00 weight% Fosfor 0.030-0.070 weight% Zwavel 0,055 tot 0,110 weight% Chromium tot 0,50 weight% Molybdeen tot 0,10 weight% Nikkel tot 0,5 weight% Koper tot 0,50 weight% Aluminium tot 0,050 weight%, Vanadium voldoende om de Stikstof van de opbrengststerkte tot 0.030 gewicht %, samen met te handhaven, naar keuze, leidt aan 0,4 weegt %, en onvermijdelijke onzuiverheden, het saldo zijnd ijzer. Deze staalsamenstelling stelt mechanische eigenschappen tentoon die voor gebruik in koppelstangen geschikt zijn maar die zowel goede breuk verdelende prestaties als goede bewerkbaarheid wanneer vergeleken bij legeringen C70S6 verstrekken. De toepassing verwijst ook naar een breuk splittable staal dat tussen 0,50 tot 0,70 % gew. C, 0,55 tot 1,00 % gew. van Mn, 0.030 tot 0,070 % gew. P en 0,055 tot 0,110 % gew. S, en met een verlenging van 25% of minder, een vermindering van gebied onder 25% omvat, en een bewerkbaarheid V.sub.20 die (m/min) de vergelijking tevredenstelt: V.sub.20.gtoreq.80-0.2H waar H de HV30 hardheid van het staal is.

 
Web www.patentalert.com

< (none)

< Heat-resistant magnesium alloy

> Heat resisting steel containing a ferrite or tempered martensite structure

> (none)

~ 00018