A mold assembly and method for molding a substantially hemispherical construct from pre-expanded polystyrene beads. The mold assembly includes a female half mold; a mating male half mold; a first male mold insert mountable on the male half mold and having a continuous, peripheral, beveled edge; and a second male mold insert mountable on the first male mold insert. For forming a construct having an impact-resistant exterior layer and an energy-absorbing interior layer, such as a motorcyclist safety helmet, the beads are initially molded under heat and compression between the female half mold and the first insert to form a first intermediate product of a first volume having a continuous, peripheral, beveled edge; said product is thereafter molded under heat and compression between the female half mold and the second insert to a second, reduced volume to form a compressed, second intermediate product, the beveled edge of the first intermediate product serving to uniformly distribute the force applied thereto. The second intermediate product is then remolded to the same volume to improve volume stability, and thereafter backfilled between the male half mold and the female half mold with additional pre-expanded polystyrene beads to form an energy-absorbing inner layer.

Eine Form und eine Methode für die Gestaltung im wesentlichen hemisphärischen herstellen aus vor-erweitertem Polystyren bördelt. Die Form schließt eine weibliche halbe Form mit ein; eine fügende männliche halbe Form; ein erster männlicher Formeinsatz besteigbar auf der männlichen halben Form und Haben eines ununterbrochenen, Zusatz-, abgeschrägten Randes; und ein zweiter männlicher Formeinsatz besteigbar auf dem ersten männlichen Formeinsatz. Für die Formung eines Konstruierens, das eine stoßfeste Außenschicht und eine energy-absorbing Innenschicht, wie ein Motorradfahrersicherheit Sturzhelm hat, werden die Korne zuerst unter Hitze und Kompression zwischen der weiblichen halben Form und dem ersten Einsatz geformt, um ein erstes Zwischenprodukt eines ersten Volumens zu bilden, das einen ununterbrochenen, Zusatz-, abgeschrägten Rand hat; besagtes Produkt wird danach unter Hitze und Kompression zwischen der weiblichen halben Form und dem zweiten Einsatz zu einer Sekunde, verringertes Volumen geformt, um ein komprimiertes, zweites Zwischenprodukt, den abgeschrägten Rand zu bilden des ersten Zwischenproduktes, das dient, die Kraft gleichmäßig zu verteilen, die dazu aufgewendet wird. Das zweite Zwischenprodukt ist remolded dann zum gleichen Volumen, um Volumenstabilität zu verbessern, und danach nachgefüllt zwischen der männlichen halben Form und der weiblichen halben Form mit zusätzlichen vor-erweiterten Polystyrenkornen, um eine energy-absorbing innere Schicht zu bilden.

 
Web www.patentalert.com

< Exfoliated polystyrene-clay nanocomposite comprising star-shaped polymer

< Organic polymers containing polyethylene or polystyrene polysiloxane diblock copolymers as melt processing aids

> Expandable polystyrene resin beads, process for the preparation of them, and foam made by using the same

> Stabilized, finely disperse low-viscosity polymer polyols with a high content of polystyrene or polystyrene copolymers

~ 00014