Process of producing polytrimethylene terephthalate (PTT) by esterification of terephthalic acid (TPA) with trimethylene glycol (TMG) in the presence of a catalytic titanium compound, precondensation and polycondensation. The esterification is effected in at least two stages, where in the first stage a molar ratio of TMG to TPA of 1.15 to 2.5, a content of titanium of 0 to 40 ppm, a temperature of 240 to 275.degree. C., and a pressure of 1 to 3.5 bar are used. In the at least one subsequent stage a content of titanium is adjusted which is higher than in the initial stage by 35 to 110 ppm.

Processo de produzir o terephthalate do polytrimethylene (PTT) pelo esterification do ácido terephthalic (TPA) com glicol do trimethylene (TMG) na presença de um composto, de um precondensation e de um polycondensation titanium catalytic. O esterification é efetuado ao menos em dois estágios, onde no primeiro estágio uma relação molar de TMG a TPA de 1.15 a 2.5, um índice de um titânio de 0 a 40 ppm, uma temperatura de 240 a 275.degree. O C., e uma pressão da barra 1 a 3.5 são usados. No ao menos um estágio subseqüente um índice do titânio é ajustado que é mais elevado do que no estágio inicial por 35 a 110 ppm.

 
Web www.patentalert.com

< (none)

< Use of nitric oxide surface anneal to provide reaction barrier for deposition of tantalum pentoxide

> Biodegradable polymeric composition

> (none)

~ 00012